• News
  • Cleaning Class | The floor scrubber fails frequently, which is why you won’t use it at all
Release time:2016/01/22

Cleaning Class | The floor scrubber fails frequently, which is why you won’t use it at all

Know how to use, clever use, indiscriminate use, are all used, your staff know how to use washing machine properly or not, why others washing machine can be used for a long time, and their own problems often have problems, consumption Time-consuming and consumption!

Do you really know how to use it?

It is not just switch on the machine so simple.

First must be clear! If you are using the washing machine for its use of the working environment is suitable, washing machine can be used normally! The problems you encounter in this situation are easily solved, but you will be in a lot of trouble if you place the floor-washing machine in an improper work environment.

 

Problems 1:Not Clean Enough

Cleaning Class  The floor scrubber fails frequently (1)

Please Check The Washing Machine Brush Disc Wear

Life or wear serious replacement immediately, this and replace the brake pads is a reason. Replacement with the new scrubber brush of the same size scrubber and special brushing should be used for cleaning tasks on specially contaminated floors. The scrubber brush is specially provided on request.

 

Problems 2:Too Much Foam!

Cleaning Class  The floor scrubber fails frequently (2)

Check if a low-foam cleaner is used. If necessary, add some low foaming agent to the tank. If there is too much dirt on the floor, it will produce a lot of foam. In this case, dilute the cleaning solution.

 

Problems 3:Washing machine brush lack of water!

Cleaning Class  The floor scrubber fails frequently (3)

1.Check the washing machine water valve has been opened.

2.Check the washing machine water tank.

3.Check the water filter is clean.

4.Check the water delivery to the washing machine brush plate tube is blocked.

 

Problems 4:Water scrub washing machine suction effect is not good!

Cleaning Class  The floor scrubber fails frequently (4)

1.Check the washing machine water squeegee tape is clean, whether there is a solid residue left inside;

2.Remove the washing machine water squeegee and wash them;

3.Check washing machine water suction motor switch is turned on;

4.Check whether the washing machine suction pipe has been properly inserted into the inlet of the sewage tank;

5. Check the water spatula wheel adjustment;

6. Replace the damaged plastic strip scrubbing machine

 

adjust the angle of the scrubbing machine water squeegee, for the correct use, washing machine squeegee should

Cleaning Class  The floor scrubber fails frequently (5)

 

Leave Your Message